(210) 209-8040

You are here: Homepage » Plumbing Services » Leak Detection » Running Water

Running Water

The ongoing noise of running water might surely get on one's nerves. More than an insignificant destruction, running water together with unusually elevated water bills and a spinning water meter point out a leaking origin inside or outside your premises. Inspect you premises for running water issues to save on water and money.

Tracking the sound to its source might help you pinpoint the location of the leak. Unfortunately not all water leaks are easily located just from tracking down the sound of running water. In many conditions you will have to ring a plumbing service professional for leak detection.

If you manage to track down the sound of running water, you will probably be led to a leaking toilet. Running toilets seep out lots of water and increase water bills by as much as $500. Whereas whichever kind of repair should be left to licensed plumber San Antonio, do it yourself fans might make use of the following instructions to repair small W.C leaks.

To Repair a Running Toilet:
Raise tank lid. If water is not filling the tank after flushing the toilet, chances are the flapper is still open. Reset the flapper. When the toilet keeps on flushing and water runs over the overflow tube - use your hand to pull up the float. Position the float so the tank stops filling as water levels reach just below the top of the overflow tube. Use the dye test to inspect for toilet leaks. Place a few drops of color dye in the tank. When colored water appears in the bowl after 30 minutes without flushing, water is slowly leaking from the tank. This type of toilet leak is most commonly caused by an old flapper. Replacing the whole part new will probably stop the slow water leak.

Slab Leaks
The ongoing noise of running water as well points to the occurrence of slab leaks - hidden water leaks that occur in underground water lines or sanitary sewer pipes. Besides elevated water bills, slab leaks squander lots of water and thousands of dollars in structural ruin. Rusty pipes, electrolysis, high water pressure, inferior products or poor pipe installation might all generate slab leaks in the premises.

Slab Leak Indicators
The following warning flags indicate the presence of a slab leak: